Can I remove rust form my bike or just prevent? - bike form cake design
My bike is alrady months old and rusting. I saw byt the beach, so it is a fact, but could not so quickly. I delete it, and if so with what? What used to prevent?
Thank you!
Tuesday, December 8, 2009
Bike Form Cake Design Can I Remove Rust Form My Bike Or Just Prevent?
3 comments:
If the bike is 3 months household vinegar will remove the surface acidity. Soak a paper towel in vinegar and folded and placed over the oxide in order to keep it moist for a few hours. When the surface oxide, light can be rubbed with vinegar and immediately. Treat all bare metal with oil afterwards. Just rub on a thin film to protect it from further oxidation. Retouching nick in the paint stains. Then apply a coat of car wax is painted in all parts, according to the instructions on the label.
A Dremel with a grinder to remove rust to nothing. Something like Permatex Rust Treatment should also work well for you, oleamide then painted with car paint Rust.
http://www.rustoleum.com/CBGBrand.asp?bi ...
If rust is the light that is likely to run with a lubricant and a soft cloth, you can rub a little with a soft brush like a toothbrush. If the rust is heavy, you need to use a solvent to remove rust, such as WD40 and a brush or a heavy Oxystrip. If the rust is removed to clean the rust on the structure, it attracts dirt. Lubricated to prevent rust oxidation conservation area at risk with a lubricant, lubricants, such as White Lightning Epic of the chain, but there are many good ones. Also, your bike in the house, if possible, or cover with a tarp or large canvas covered note, if you must stay out. Gorz, and a good point. If mold painted in an area you might want a bit of playing with color. If you do, all the rust is removed first or the rust will continue under the new color to grow.
Post a Comment